AIR MOTOR UNIT FOR WINCHES

GLOBE has developed specially for winch and hoist applications a braked air motor set. The unit has a rugged GLOBE vane motor with a fail safe BN brake and a proportional directional control valve.

The vane motor is of rugged design and very good for harsh conditions. The BN brake is a spring loaded, air released failsafe brake. The holding torque is 1,5 to 2 time the maximum torque of the motor.
On top of the motor, the proportional valve is mounted. It either can be remote controled or hand controled.

ModelMax. power (kW)Torque at max. power (Nm)Stall torque (Nm)Min. starting torque(Nm)Max. speed (rpm)Download 2D- 3DDownload catalogue
VS4BN71H21,94,55,84,64000DOWNLOAD
VS4BN71R21,94,55,84,64000DOWNLOAD
VS6BN90H23,29,8128,23000DOWNLOAD
VS6BN90R23,29,8128,23000DOWNLOAD
VS8BN90H34,914,219,8173000DOWNLOAD
VS8BN90R34,914,219,8173000DOWNLOAD
VS10BN100H49,03440362400DOWNLOAD
VS10BN100R49,03440362400DOWNLOAD

Motor not listed? Contact us for customized motors.

ADVANTAGES

OF GLOBE AIR MOTOR UNIT FOR WINCHES

Download documentation

Features:
The Vane motor:

  • No pins or springs
  • Guaranteed positive start-up
  • Simple adjustable torque and output speed
  • Can be stalled under load without damage

The BN brakes :

  • Brake can be used in holding and stopping of a load
  • Field serviceable
  • Easy flange connection according to IEC standards
  • Low maintenance because very few parts are exposed to wear

The proportional valves (hand control valve / HCV or remote control valve / RCV ):

  • Rugged cast steel body
  • High flow design for low back pressure
  • Frictionless matched spool and sleeve
  • Very accurate proportional control
  • Available in equal power or reduced power

AIR MOTOR UNIT FOR WINCHES

PV 20140915 10 luchtmotor voor lier e1443523529513 - Air Motor unit for Winches

On top of the motor a proportional control valve is mounted. It can be a proportional remote control valve of a proportional hand control valve. The proportional valve controls the direction and speed of the motor.
The brake is released with pipelines from the proportional control valve. The unit is designed that the motor is under pressure before the brake is released.

As standard the proportional valves can be supplied with either Equal Power of Biased Power spools, the latter is suitable for hoisting applications. The motor will have maximum power in lifting and reduced power in lowering. Because of the biased valve the load will not pull the motor in over speed in lowering direction.

The air motor unit confirms to European Standard NEN-EN 13463-1 for non-electrical equipment for explosive atmospheres ATEX GROUP II cat 2 GDc T3.

GLOBE has a wide program with air motors from 0,1 to 23 kW. The air motors can be supplied in combination with a gearbox for higher torques and lower speeds of rotation. Custom build air motors are possible due to an own design and production department. All standard motors are available from stock.

See all air motors